60W Contractor Series PA Amplifier
Click to print this page

PBM-60 - 60W Contractor Series PA Amplifier

Our contractor series three channel mixer/amplifier is a 60 watt amplifier. It features an auto mute function, music on hold output with separate level control (600 ohm line and one watt 8 ohm), 600 ohm telephone line input with level control, bass/treble tone controls, front panel level controls, and manual muting contacts.

In addition to the telephone line input, this unit accepts inputs from three sound sources. Each source can utilize a choice of microphone inputs (terminal strip) or auto summing stereo auxiliary RCA inputs. Mic 1 also contains an input for an XLR connector.

Outputs include a choice of 4, 8, and 16 ohm as well as 70 and 25 volt line outputs. There is an auxillary output connection as well.

Technical Specifications

Power Suppy 120VAC, 50/60 Hz.
Rated Output Power 60 W RMS
Frequency Response Rate 50-15,000 Hz. +/- 3 dB
Total Harmonic Distortion 1% or less at 1 kHz.
Input Sensitivity/Impedance Tel: 100mV/600 ohms, balanced
Mic- 1-3: 1.0mV/600 ohms, balanced
Aux- 1-3: 200mV/50,000 ohms, unbalanced
S/N Ratio Mic- 1-3: Better than 55 dB
Aux- 1-3: Better than 70 dB
Tel: Better than 60 dB
Speaker Outputs 4 ohms, 8 ohms, 16 ohms, 25/70V line
Music on Hold 600 ohm line/1 Volt
8 ohm/ 1 Watt
Mute Level Aux 1-3/Mic 2 & 3 >/= 40 dB
VOX Level Mic 1/Tel 0-40 dB adjustable
Tone Control Bass +/- 10 dB at 100 Hz.
Treble +/- 10 dB at 100 Hz.
Finish Black

Downloads (Right-click and select "Save Target As ...")

© 2002 CSi-SPECO, All Rights Reserved
Design by Group M7